Expert Answers about RV Cargo Slides

• Is MORryde RV Cargo Sliding Tray MR74FR Rustproof
• Hello David; the MORryde RV Cargo Sliding Tray - 72" x 20" - 2 Way Slide # MR74FR is not technically rustproof, no. That said, it does have a powder coat finish on it, so while it's possible it can rust, the powdercoat does make it highly resistant. And the slide being inside a storage compartment makes it highly unlikely any rust will develop on the # MR74FR.
  view full answer...


• How Much Clearance Is Needed Between The Compartment Door And MORryde Sliding Cargo Tray
• Hi Norm, The components at the front end of the MORryde RV Cargo Sliding Tray # MR89FR are all very close to being inline with each other. The lip on the tray sticks out the furthest and even then it's a negligible amount. MORryde doesn't list a clearance requirement but I'd give yourself at minimum 1/4" - 1/2" from the opening to avoid any issues. Most RV compartment doors sit flush with the wall because of the flange that prevents the door from swinging in so as long as you're behind...
  view full answer...


• Recommended Awning Mounting Brackets
• We have two options to attach awning fabric to the side of your RV. They are the 8' Solera Awning Rail Extrusion in white item # LC715216 and in black item # LC715217. Additionally, we have a few brackets for slide out awnings like item # LC795354 but they are specific to Solera models. Either way I would need to know what model of awning you have to confirm the right brackets for you. If you could email me this information directly or comment below I would be happy to help. As far as...
  view full answer...


• What Slide Out Motor Fits The Drivers Side Slideout on 2013 Itasca Suncruiser 32H?
• Based on the parts diagram from Winnebago your 2013 Itasca Suncruiser 32H will use the Lippert Replacement 500:1 Motor for Electric In-Wall RV Slide-Out System # LC287298.
  view full answer...


• Can etrailer Generator 333-0005 Power 2 Slide Outs of 30 Amp RV
• Hey Kelly, yes the etrailer generator part # 333-0005 would be able to supply enough power for your two slide outs on your travel trailer that has a 30 amp plug.
  view full answer...


• Direct Replacement Slide Out Motor for 1510000006
• Hey Larry, thanks for reaching out! The correct part to replace your 1510000006 motor is the Replacement PowerGear RV Above Floor Slide-Out Moto # LC368417. The Replacement Motor # LC386322 you were looking at does look similar, but it isn't the correct part you need.
  view full answer...


• Availability of a RV Awning With a 9' Width
• Currently a 10' Awning # LCV000211446 is going to be the narrowest we carry. You would need the Arm Set # LC759516 and just under 10' of Rail Extrusion # LC715217 to install it. Do note the width of an awning is not measured on the fabric but the width of the center of the arms from one side to the other. A 9' wide awning would have to be special ordered from a local RV dealer.
  view full answer...


• Could LaSalle Bristol Roof Vent Install Kit Work with MaxxFan 7000k Roof Vent
• Hey David, we've used the LaSalle Bristol RV Roof Vent install kit part # 344270KITW to install several MaxxFan RV roof vents and it's worked well so it would also work well for you. This comes with everything needed so it would be a great choice.
  view full answer...


• Is the Curt TruTrack 4P Trailer Mounted Weight Distribution System C74RV The Correct Model For Me?
• Hey Larry, thanks for providing all that info. It sounds like you are on the right track here, because the Curt TruTrack 4P Trailer Mounted Weight Distribution System # C74RV is a great choice. This system is designed for trailers with a tongue weight between about 700 and 1,000 lbs. It stands to reason that your trailer will be within this range at all times, loaded or unloaded. This is a 4-point system so it will provide superior sway prevention and control. The # C74RV does include...
  view full answer...


• Which Demco Hijacker Autoslide for Ford Rail Kit to Tow 17,300 lb Trailer
• Hey Rick, if you absolutely sure your RV would never weigh more than 18k the part # DM8550024 would work fine as it's totally safe all the way up to 18k. If you think you'll end up over that number or want some "room to grow" then I would go with the 21k version part # DM8550038 instead.
  view full answer...


• SumoSprings Recommendations for a 2020 Thor Quantum CR24 Class C Motorhome
• Thanks for the kind words, Jack! I typically recommend using the higher rated SumoSprings when it comes to motorhome just because they are heavier and the SumoSprings won't engage unless needed. This means for your 2020 Thor Quantum CR24 motorhome you need the following: - Front # SSF-106-47 - Rear # SSR-338-54 Attached are some installation videos for you to check out!
  view full answer...


• Sidewinder Pin Box for 2022 Wildwood Heritage Glen 5th Wheel
• The ST200 turret for the # 5AS16K has been discontinued. You may be able to find it still but I wasn't able to when I ran a quick search. At this time, the only Sidewinder we offer that fits the 1621 is the # RP34FR. Also, you aren't hearing from Reese because they're owned by First Brands now. Ever since this change the wait times on the phone are extremely long and many of their parts are gone or on indefinite backorder. The # RP34FR will help with clearance but it won't do anything...
  view full answer...